Android как изменить имя устройства wifi

Имена

Android как изменить имя устройства wifi

rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so

ro.ril.hep = 1
ro.ril.enable.dtm = 0
ro.ril.hsdpa.category = 8

# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000

wifi.interface = eth0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15

# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
#ro.sf.lcd_density = 120
ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1

# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072

# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0

# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008

# For SD storage insert notification sound
persist.service.mount.playsnd = 0

# For no auto focus devices
ro.workaround.noautofocus = 1

# default value of brightness
settings.display.brightness=143

# For HSDPA low throughput
ro.ril.disable.power.collapse = 1

# For PDP overlap problem
ro.ril.avoid.pdp.overlap = 1

#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30

#
# Increase SKIA decode memory capability for progressive jpg file
#
ro.media.dec.jpeg.memcap = 20000000

# try to disable proximity sensor in call by default
#gsm.proximity.enable=false

# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.2.017
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339

Читайте также:  Мудл лну имени тараса шевченко

# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1

# Following property will be reference by Settings.
ro.product.processor=600MHz
ro.product.ram=512MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 b/g/n

# For opensense sdk
ro.htc.common.version = 2.1.0.0

1.включить WiFi
2.запустить терминал
3.выполнить в терминале: su
4.выполнить в терминале: setprop net.hostname НОВОЕ_ИМЯ

проверить изменилось ли имя можно командой
getprop net.hostname

по токому методу меняется име только когда проверяеш в терменале, при проверке нароуторе име тоже остается. ктото решил проблему.
И еще никто не знает как поменять MAC

Добавлено 29.11.2011, 13:43:

Источник

Android как изменить имя устройства wifi

rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so

ro.ril.hep = 1
ro.ril.enable.dtm = 0
ro.ril.hsdpa.category = 8

# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000

wifi.interface = eth0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15

# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
#ro.sf.lcd_density = 120
ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1

# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072

# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0

# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008

# For SD storage insert notification sound
persist.service.mount.playsnd = 0

# For no auto focus devices
ro.workaround.noautofocus = 1

# default value of brightness
settings.display.brightness=143

# For HSDPA low throughput
ro.ril.disable.power.collapse = 1

# For PDP overlap problem
ro.ril.avoid.pdp.overlap = 1

#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30

Читайте также:  Имена для зайцев девочек

#
# Increase SKIA decode memory capability for progressive jpg file
#
ro.media.dec.jpeg.memcap = 20000000

# try to disable proximity sensor in call by default
#gsm.proximity.enable=false

# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.2.017
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339

# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1

# Following property will be reference by Settings.
ro.product.processor=600MHz
ro.product.ram=512MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 b/g/n

# For opensense sdk
ro.htc.common.version = 2.1.0.0

1.включить WiFi
2.запустить терминал
3.выполнить в терминале: su
4.выполнить в терминале: setprop net.hostname НОВОЕ_ИМЯ

проверить изменилось ли имя можно командой
getprop net.hostname

по токому методу меняется име только когда проверяеш в терменале, при проверке нароуторе име тоже остается. ктото решил проблему.
И еще никто не знает как поменять MAC

Добавлено 29.11.2011, 13:43:

Источник

Android как изменить имя устройства wifi

rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by Godel_Chen
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so

ro.ril.hep = 1
ro.ril.enable.dtm = 0
ro.ril.hsdpa.category = 8

# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000

wifi.interface = eth0
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 15

# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
#ro.sf.lcd_density = 120
ro.sf.lcd_density = 160
ro.com.google.locationfeatures=1

# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072

Читайте также:  Фонд поддержки семьи и демографии во имя святых петра и февронии

# Default network type
# 0 => WCDMA Preferred.
ro.telephony.default_network = 0

# View configuration for QVGA
view.fading_edge_length = 8
view.touch_slop = 15
view.minimum_fling_velocity = 25
view.scroll_friction = 0.008

# For SD storage insert notification sound
persist.service.mount.playsnd = 0

# For no auto focus devices
ro.workaround.noautofocus = 1

# default value of brightness
settings.display.brightness=143

# For HSDPA low throughput
ro.ril.disable.power.collapse = 1

# For PDP overlap problem
ro.ril.avoid.pdp.overlap = 1

#
# This file describes the media capabilities and profiles
# using system properties.
#
# Note: The property key and value has some length
# limit as defined by PROPERTY_KEY_MAX and
# PROPERTY_VALUE_MAX, respectively
#
# WARNING: We may not use system properties for specifying
# media capabilities and profiles in the future
#
ro.media.enc.file.format = 3gp,mp4
ro.media.enc.vid.codec = m4v,h263
ro.media.enc.vid.h263.width = 176,640
ro.media.enc.vid.h263.height = 144,480
ro.media.enc.vid.h263.bps = 64000,1600000
ro.media.enc.vid.h263.fps = 1,30
ro.media.enc.vid.m4v.width = 176,640
ro.media.enc.vid.m4v.height = 144,480
ro.media.enc.vid.m4v.bps = 64000,1600000
ro.media.enc.vid.m4v.fps = 1,30

#
# Increase SKIA decode memory capability for progressive jpg file
#
ro.media.dec.jpeg.memcap = 20000000

# try to disable proximity sensor in call by default
#gsm.proximity.enable=false

# Release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.version = Bluetooth 2.1 + EDR
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.2.017
#0x10000010010100100000011 represent bt profile list
ro.bt.profiles = 4270339

# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1

# Following property will be reference by Settings.
ro.product.processor=600MHz
ro.product.ram=512MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.bluetooth= 3.0
ro.product.wifi = 802.11 b/g/n

# For opensense sdk
ro.htc.common.version = 2.1.0.0

1.включить WiFi
2.запустить терминал
3.выполнить в терминале: su
4.выполнить в терминале: setprop net.hostname НОВОЕ_ИМЯ

проверить изменилось ли имя можно командой
getprop net.hostname

по токому методу меняется име только когда проверяеш в терменале, при проверке нароуторе име тоже остается. ктото решил проблему.
И еще никто не знает как поменять MAC

Добавлено 29.11.2011, 13:43:

Источник

Оцените статью
Имя, Названия, Аббревиатуры, Сокращения
Добавить комментарий

Adblock
detector